Thieno[2,3-c]pyridine-3,6(5H)-dicarboxylic acid, 2-amino-4,7-dihydro-, 6-(1,1-dimethylethyl) 3-ethyl ester
2-Amino-4,7-Dihydro-5H-Thieno[2,3-C]Pyridine-3,6-Dicarboxylic Acid 6-Tert Butyl Ester 3-Ethyl Ester
CAS: 193537-14-3
Molecular Formula: C15H22N2O4S
Thieno[2,3-c]pyridine-3,6(5H)-dicarboxylic acid, 2-amino-4,7-dihydro-, 6-(1,1-dimethylethyl) 3-ethyl ester - Names and Identifiers
Thieno[2,3-c]pyridine-3,6(5H)-dicarboxylic acid, 2-amino-4,7-dihydro-, 6-(1,1-dimethylethyl) 3-ethyl ester - Physico-chemical Properties
| Molecular Formula | C15H22N2O4S |
| Molar Mass | 326.41 |
| Density | 1.252±0.06 g/cm3(Predicted) |
| Melting Point | 153 °C |
| Boling Point | 492.5±45.0 °C(Predicted) |
| Flash Point | 251.7°C |
| Vapor Presure | 7.64E-10mmHg at 25°C |
| pKa | 0.40±0.20(Predicted) |
| Storage Condition | under inert gas (nitrogen or Argon) at 2–8 °C |
| Refractive Index | 1.572 |
Thieno[2,3-c]pyridine-3,6(5H)-dicarboxylic acid, 2-amino-4,7-dihydro-, 6-(1,1-dimethylethyl) 3-ethyl ester - Risk and Safety
| Hazard Symbols | Xi - Irritant |
| Risk Codes | 36/37/38 - Irritating to eyes, respiratory system and skin. |
| Safety Description | S26 - In case of contact with eyes, rinse immediately with plenty of water and seek medical advice. S36/39 - |
| Hazard Note | Irritant |
Thieno[2,3-c]pyridine-3,6(5H)-dicarboxylic acid, 2-amino-4,7-dihydro-, 6-(1,1-dimethylethyl) 3-ethyl ester - Introduction
2-amino -4,7-Dihydro-5H-Thieno [2,3-c] Pyridine-3,6-Dicarboxylic Acid 6-Tert Butyl Ester 3-Ethyl Ester is an organic compound with a variety of properties and uses. The following is a description of the properties, uses, preparation and safety information of the compound:
Nature:
-Appearance: A solid, usually yellow or orange crystalline powder.
-Melting point: About 90-95 ° C.
-Solubility: Soluble in most organic solvents, such as dimethyl sulfoxide and dimethylformamide.
Use:
-as a synthetic material: 2-amino -4,7-Dihydro-5H-Thieno [2,3-c] Pyridine-3,6-Dicarboxylic Acid 6-Tert Butyl Ester 3-Ethyl Ester can be used for synthetic polymer materials, such as high efficiency organic light emitting diode (OLED) light emitting layer material.
-Chemical research: The compound can also be used in organic synthesis reactions, for example, as a catalyst, reagent or intermediate.
Method:
-Synthesized from commercially available raw materials: This compound can be synthesized by esterifying the corresponding substituted thiophene and substituted pyridine with an appropriate acid anhydride.
Safety Information:
- 2-Amino-4, 7-dihydro -5H-thieno [2,3-c] Pyridine-3,6-Dicarboxylic Acid 6-Tert Butyl Ester 3-Ethyl Ester Specific hazard and safety data may vary by region and supplier. When using this compound, the corresponding operating procedures and laboratory safety procedures should be followed.
-This compound may be irritating to the skin, eyes and respiratory tract. When in contact, avoid direct contact with skin and eyes, and ensure operation in a well-ventilated environment.
-Personal protective equipment such as laboratory gloves, goggles and laboratory coats should be worn when handling the compound.
Nature:
-Appearance: A solid, usually yellow or orange crystalline powder.
-Melting point: About 90-95 ° C.
-Solubility: Soluble in most organic solvents, such as dimethyl sulfoxide and dimethylformamide.
Use:
-as a synthetic material: 2-amino -4,7-Dihydro-5H-Thieno [2,3-c] Pyridine-3,6-Dicarboxylic Acid 6-Tert Butyl Ester 3-Ethyl Ester can be used for synthetic polymer materials, such as high efficiency organic light emitting diode (OLED) light emitting layer material.
-Chemical research: The compound can also be used in organic synthesis reactions, for example, as a catalyst, reagent or intermediate.
Method:
-Synthesized from commercially available raw materials: This compound can be synthesized by esterifying the corresponding substituted thiophene and substituted pyridine with an appropriate acid anhydride.
Safety Information:
- 2-Amino-4, 7-dihydro -5H-thieno [2,3-c] Pyridine-3,6-Dicarboxylic Acid 6-Tert Butyl Ester 3-Ethyl Ester Specific hazard and safety data may vary by region and supplier. When using this compound, the corresponding operating procedures and laboratory safety procedures should be followed.
-This compound may be irritating to the skin, eyes and respiratory tract. When in contact, avoid direct contact with skin and eyes, and ensure operation in a well-ventilated environment.
-Personal protective equipment such as laboratory gloves, goggles and laboratory coats should be worn when handling the compound.
Last Update：2024-04-09 19:05:47
![Thieno[2,3-c]pyridine-3,6(5H)-dicarboxylic acid, 2-amino-4,7-dihydro-, 6-(1,1-dimethylethyl) 3-ethyl ester](http://res.chembk.com/assets/str/2d/1/19/193537-14-3.png)
Supplier List
Product Name: 2-Amino-4,7-Dihydro-5H-Thieno[2,3-c]Pyridine-3,6-Dicarboxylic Acid 6-Tert Butyl Ester 3-Ethyl Ester Visit Supplier Webpage Request for quotation
CAS: 193537-14-3
Tel: 18301782025
Email: 3008007409@qq.com
Mobile: 18021002903
QQ: 3008007409
Wechat: 18301782025
CAS: 193537-14-3
Tel: 18301782025
Email: 3008007409@qq.com
Mobile: 18021002903
QQ: 3008007409
Wechat: 18301782025
Product Name: 2-Amino-4,7-Dihydro-5H-Thieno[2,3-c]Pyridine-3,6-Dicarboxylic Acid 6-Tert Butyl Ester 3-Ethyl Ester Visit Supplier Webpage Request for quotation
CAS: 193537-14-3
Tel: 18301782025
Email: 3008007409@qq.com
Mobile: 18021002903
QQ: 3008007409
Wechat: 18301782025
CAS: 193537-14-3
Tel: 18301782025
Email: 3008007409@qq.com
Mobile: 18021002903
QQ: 3008007409
Wechat: 18301782025
View History